Table Stands for Compact Microphones
コンパクトマイクロフォン用テーブルスタンド
Please consider the notes under "table mounting."
Table Stand
TR 200 Lg
- elegant design
- fully adjustable swivel joints at both ends of the tube
The required K 5 LU adapter cable (Lemo to XLR-3M) is included with the CCM-L.
The TR 200 Lg is also available with permanently attached cable, either at the rear or the bottom of the base.Surface finish: matte gray (g)
The CCM microphone is not included.
Twin Table Microphone
T2 CCM 4gThis table microphone consists of two CCM 4 Compact Microphones (cardioids) rigidly attached to one another and facing in the same direction. They can be tilted forward or backward together. The second channel serves as a fail-safe backup. The permanently attached output cable terminates in an XLR-5M connector.
Cable: 5 m
Surface finish: matte gray (g
Miniature Table Stand
TCg, TC 2g
- adjustable angle
These elegant table stands, with vibration-isolating base, can be placed unobtrusively. The vertical rod is removable, allowing the microphone to be mounted on the base close to the mounting surface.
A neat cable run is obtained when the cable is put into the wire loop between the bolt and the socket.Dimensions: base diameter: 57 mm
height: 80 mm
Surface: matte gray (g)The microphone(s) and cable(s) are are not included.
TCg
Here you will find table stands of the Modular System.
TCg
TC 2g
CCM-L/ U Compact Microphone,
TCg / TC 2g table stand
