Handheld Speech and Vocalist Microphones
CMH 6ハンドヘルド ボーカルマイクロフォン
- two directional patterns available
- built-in protection from plosive sounds (“popping”) and handling noises
Protection from plosive sounds (vocal “popping”)
...can be achieved with conventional windscreens; but the more effective these are, the greater the risk to the other parameters of the microphones’ performance.
SCHOEPS handheld microphones, however, use a very effective windscreen as a basic element of their design, into which a special capsule is integrated.
Protection from solid-borne noise...is achieved by means of a progressively elastic mounting for all the functional elements.
As with the CMC 6, each version of the CMH can operate with any 12 V or 48 V standard phantom powering.
CMH 64 U
with Cardioid PatternWhen there is simultaneous loudspeaker transmission, the risk of acoustic feedback is reduced by the low-frequency rolloff and the directional characteristic, provided that the performer stays on axis and away from the loudspeakers.
Proximity effect compensates for the loss of bass when used at close distances.
CMH 641 U
with Supercardioid PatternThe increased directionality and the reduced low-frequency response of this model help to reduce the chance of acoustic feedback when used with monitor loudspeakers or a public address system ? provided that the microphone is aimed at the soloist and not at the loudspeaker system.
Proximity effect may be used to boost the voice of the speaker or singer.
Accessories:
SGH: stand clamp with tapered holder. The operating angle is adjustable. For 5/8"-27 NS threads; adapter provided for 3/8" and 1/2" threads
Color: grayoptional:
For hygienic reasons and ease of identification, a set of interchangeable thin foam guards is available in red, blue, green, yellow and gray:Hygiene Guard PS 4