Cable Hangers

ケーブルハンガー

　

Cable Hanger H 20g This cable hanger suspends a microphone of the Colette Modular System from its cable, and allows it to be set both vertically and horizontally to nearly any angle. A tie line can be attached to a loop in the cable to keep the microphone absolutely steady. The use of SCHOEPS microphone cable particularly minimizes the risk that the cable will twist after being set up, e.g. in response to an increase in temperature. Color: gray/ matte gray
Miniature Cable Hanger HC This accessory is used when hanging an MK capsule on a KC Active Cable or a CCM Compact Microphone. Incorporated in its design is the SGC swivel which allows orientation to any angle laterally, and vertically to any angle from 0° to 100°. There is very little danger of an Active KC Cable or the cable of a CCM twisting (e.g. as a result of rising temperature) after it has been suspended. The HC is suitable only for use with the CCM-U or the Active Cable KC (see also here) because of the cable diameter. If used with the CCM-L (which has a thinner cable), the mounting should be secured additionally with adhesive tape. Color: gray

| INDEX | HOME PAGE |