rc

Note:
Though not specifically designed for such use, the laterally addressed capsules MK 4V, MK 41V, MK 8 and MK 6 can also be used on the Active Tube RC or the variable angle joint GVC; when fully tightened they will rarely be aimed where you intend. On request we will supply an elastic ring which can be slipped over the threads of the RC or GVC so that the final turn of the capsule will place it at the desired angle of rotation.

Special Version of the RC Active Tube:
RC KC

This special type of Colette Active Tube terminates in a connector mounted on a flexible, 0.5-meter Colette cable. This connector is screwed onto the microphone amplifier, which may then be mounted on the vertical support rod with a clamp or inserted in the cable path at a hidden position.

This arrangement is most useful when working in close quarters, where inadvertent movement at the rear of the microphone stand might disturb the alignment, or where the microphone amplifier body and cable connector might be objectionable and when the arrangement is not changed frequently.

The possible drawbacks are:
The inconvenience of wrapping and securing the cable attached to the tube especially if it is long.
The length should not exceed what is necessary, in order to avoid possible interference.
Both of these problems can be avoided by choosing a similar arrangement with the Compact Microphone CCM-L instead.

Type designation: e.g. RC 350 KC: 0,5g = RC 350g with 0.5 m cable length
Special lengths are available on request.
Surface finish: matte gray (g)

Included accessory: swivel joint RG 8

MK... microphone capsule
RC 350 KC 0,5g Active Tube
CMC 6 Ug microphone amplifier
or M 222
STR 600g vertical support rod
K 20 STR clamp for CMC
(BF 250 floor stand)